Products

The LT HQ600-S-7P is a CNC busbar punching and shearing centre for high-volume switchgear, control panel and power distribution enclosure manufacture.

This LT pneumatic marking machine is an integrated dot peen marking system that mounts with a busbar processing machine and marks copper and aluminium...

The LT CNCMN-200A is a CNC busbar chamfering machine that mills angles and corner arcs on the ends of copper and aluminium busbars — thickness 4–16 mm,...

The LT HQ600-S-7P is a CNC busbar punching and shearing machine combining 7 punching dies, 1 shearing die and 1 embossing die in one straight-column...

The LT HQ600-S-8P is a CNC busbar punching and shearing machine built on a straight-column frame with a single-row die bank of 8 punching dies plus 1...

The LT copper busbar marking machine applies permanent identification marking to copper and aluminium busbar — the phase, circuit or project references...

The LT CNCLK40 automatic busbar loading machine loads copper and aluminium busbar into a CNC busbar processing line without an operator handling each bar.

The LT HQ400-1200B is a servo-driven CNC busbar bending machine for panel builders and switchgear manufacturers working with copper busbar up to 15 ...

The LT 303U-3-C is a manual hydraulic three-in-one busbar machine for UK workshops that want full punch‑cut‑bend capability without the cost and setup...

The LT HQ400-2000B is the long-bed version of the HQ400 bending machine, with a 2 000 mm gauge for busbars that exceed the 1 200 mm working length of...